pp板材在儲藏搬運過程中需要注意

Attention should be paid to PP sheet during storage and handling

1、施工圖紙及其他技術文件齊全，且已進行圖紙技術交底，滿足pp板材施工要求;

1. The construction drawings and other technical documents are complete, and the technical disclosure of drawings has been carried out to meet the construction requirements of PP plate;

2、施工人員應經過建筑管道安裝的技術培訓，能夠熟練的對pp板材在施工過程中的常見問題進行分析處理。

2. The construction personnel shall be trained in the technology of building pipeline installation, and be able to skillfully analyze and handle the common problems of PP plate in the construction process.

3、施工方案、技術、材料等能保證pp板材的正常施工。

3. The construction scheme, technology and materials can ensure the normal construction of PP plate.

pp板材管在儲藏搬運過程中需要注意：

Attention shall be paid to PP sheet pipe during storage and handling:

1、pp板材管管材應水平堆放在平整的地上，應避免彎曲管材，堆置高度不得超過1.5m，管件應逐層碼堆，不宜疊得過高。

1. PP sheet pipes shall be stacked horizontally on flat ground, bending pipes shall be avoided, stacking height shall not exceed 1.5m, pipe fittings shall be stacked layer by layer, not too high.

2、管材和管件應放在通風******的庫房或簡易棚內，不得露天存放，防止陽光直射，注意防火安全，距離熱源不得小于1m。

2. Pipes and pipe fittings shall be placed in a well ventilated warehouse or simple shed, and shall not be stored in the open air, to prevent direct sunlight, pay attention to fire safety, and the distance from the heat source shall not be less than 1 m.

3、搬運管材和管件時，應小心輕放，避免油污，嚴禁劇烈撞擊，嚴禁與尖銳物品碰觸和拋、摔、滾、拖。

3. When handling pipes and pipe fittings, handle them with care to avoid oil pollution, and avoid violent impact. It is strictly prohibited to touch sharp objects and throw, fall, roll and drag them.

pp板材管在施工過程中要確保提供的pp板材管材和管件應符合設計規定，并附有產品說明書和質量合格證書。在使用前一定要對pp板材進行技術鑒定或者復檢，杜***使用質量有異有損壞跡象的管材。

During the construction of PP sheet pipe, it is necessary to ensure that the PP sheet pipe and pipe fittings provided shall comply with the design regulations, and shall be attached with the product specification and quality certificate. Before use, it is necessary to carry out technical appraisal or re inspection on PP sheet to prevent the use of pipes with different quality and damage signs.

pp板材管施工過程中設置方式

Setting method in the construction of PP sheet pipe

pp板材管材管道敷設形式的不同產生了伸縮節設置和管套設置兩種設置方式。

There are two ways of setting expansion joint and pipe sleeve due to the different laying forms of PP sheet pipe.